欢迎光临 绿志岛公司官网!
        20年专注电子焊接东莞市绿志岛金属有限公司
        广东省绿志岛金属材料有限公司
        全国咨询热线:135-2799-2739
        绿志岛新闻中心-锡膏、焊锡条、焊锡丝
        联系我们
        联系人:曾经理
        手机:135-2799-2739
        电话:0769-38893080
        邮箱:anson@cqshsj.com
        地址:东莞市石排镇田边村石贝工业区
        产品动态

        最新推出无铅中温Sn/Bi/Cu合金锡膏—PF-3005-C

        作者:张建斌 2021-10-19 0

        绿志岛金属有限公司最新推出无铅中温Sn/Bi/Cu合金锡膏,型号:中温锡膏PF-3005-C,具特性如下:

        1. 熔点低(146190℃),焊接温度接近锡铅锡膏,对元器件和板材耐热性要求低,生产工艺窗口大;

        2. 相对于目前常用的无铅合金锡膏(如Sn/Ag/CuSn/Bi/Ag),成本低;

        3. 热导性好,在散热模组产品上应用此产品,其热导率比Sn/Bi合金增高一倍左右;

        4. 此合金机械强度接近Sn/Ag/Cu合金。

        4. 此产品采用球形度好、颗粒度分布均匀的锡粉炼制而成,粘度适中,适应各种涂布方法;

        5. 印刷滚动性、脱膜性及抗坍塌性均表现优良,可有效解决密间距和小元件的焊盘印刷;

        6. 润湿性好,能适应不同的金属镀层;焊后板面残留极少且透明、阻抗高,焊点平滑饱满;

        7. 此款合金锡膏可作为Sn/Ag/Cu合金(表面贴装和通孔涂布工艺)及Sn/Bi(散热模组)类型产品的替代品;可有效地缓解焊料行业中对Ag需求的剧烈增加和避免无铅的高温焊接;解决了Sn/Bi焊料在散热模组产品上的低热导问题。


                Legret metal Co., Ltd. launches the middle temperature Lead-free solder paste Sn/Bi/Cu newly. Its characteristics are as follows:

        1. Lower melting point, weld temperature is close to the Sn/Pb solder paste.Lower heat-resistant requirements of the components and panels, the production technology window are larger;

        2. Lower cost to the common Lead-free solder paste that currently used (such as Sn/Ag/Cu or Sn/Bi/Ag);

        3. Good thermal conductivity, using this product on the products of mould group of heatsink, its heat conduction rate increases by about one time than Sn/Bi alloy;It shows good thermal conductivity. Its heat conduction rate increases by about one time of the Sn/Bi alloy's when used on the mould group of heatsink. 

        4. The mechanical intensity of this alloy is close to Sn/Ag/Cu.


        附本锡膏应用案例:

        1、应用于散热器的焊接

        2、应用于表面贴装

        电路板